THOMSON GRASS VALLEY KayakDD-1, User Manual

Page: 405 / 448

KayakDD - Digital Production Switcher
•
Edit Macro - View Macro – Modify
ditor.
within a list box. The complete cursor control is always relevant.
ake sure that in the Config menu the Running Application is selected to witch you
ant to add the macros. If the cursor is not on a Running Application the menu item
menu is disabled.
Select with the cursor button, the digipot or by mouse click a free Key No. in the Make
Memo list field.
Push Record button to start recording the macro. Push the desired control panel
buttons and adjust the desired digipots. If a pause is needed between commands,
push the Insert Pause and select the desired time (0.5, 1.0, 2.0, 3.0 or 5.0 in seconds),
then proceed with the commands. At the end of the macro push Record again to stop
recording.
NOTE! If no pause is inserted all commands were executed immediately.
If you want to rename the stored commands push Modify and select Rename in the
overlay. Type in the name with the keyboard overlay.
To copy a macro to another Key No. select the macro and push Modify. Select Copy in
the overlay. Type in the desired Key No. and confirm with Enter.
Macros can also be swapped by selecting Swap in the Modify overlay.
To delete a macro select the macro in the list, push Modify and select Delete.
It is possible to assign other busses to the Make buttons in the control panel., e.g. Aux
busses. Select Key All and push Modify. Select from the overlay the bus you want to
assign to these buttons.
•
Transfer Key
Transfer the selected macro from one button to another.
For details refer next section Macro E
•
Cursor Up/Down
The vertical cursor softkeys and the vertical cursor digipot are used to navigate
How to Store a Macro:
M
w
User Manual 405