THOMSON GRASS VALLEY KayakDD-1, User Manual

Page: 107 / 448

KayakDD - Digital Production Switcher
3.9.3 Enabling and Disabling Bank Mode
The Bank mode in the E-MEM panel permits access to a stored snapshot or timeline
with a single key (hotkey). The bank number is the tens digit of the register. The
hotkeys are the units digits of the register. The Bank mode may be enabled during
storing but this does not have any particular benefit.
3.9.3.1 Enabling Bank Mode
Hold the Bank key down and select the desired bank with the numeric keypad. The
Bank key lights up. In the display a ” B ” appears before the register number.
3.9.3.2 Disabling Bank Mode
Press the lighting Bank key.
3.9.4 Selecting a Register During Storing
During the storing of snapshots or timelines the register to be used for storage must be
selected. The procedure is the same for both cases.
However, the indication in the display differs
•
for snapshots STOR
•
for Timelines EDIT
If the register number is to be taken over that was shown before the actuation of the
Store or Edit key, no further selection is necessary.
NOTE! During storing the contents of the register is overwritten!
If you wish to select the next free register, press the FREE key.
If you wish to select a particular register, enter a one- or two-digit number with the
numeric keypad. Errors can be deleted with
Clear .
NOTE! Should the register be assigned, the contents is overwritten
when storing.
User Manual 107