THOMSON GRASS VALLEY KayakDD-1 User Manual Download Page 223

Page: 223 / 448

KayakDD - Digital Production Switcher

5.11.5.7 Loop

This function allows you to put the selected effect in an endless loop:

Loop:

Run from begin to end.

ounce:

Run begin to end, then reverse to begin, etc.

Figure 152

DPM – Timeline – Video Sources

5.11.5.8 Protect

rotects the register against save, delete or rename.

Modify / Use

urces / Loop / Protect are direct

ermanent changes that do not need confirmation. Using these function does not

ct the chosen register as the current effect. A current effect is only selected by a

Recall in the menu, by the Store and Edit button on the main control panel and by E-
MEM recalls.

he buttons

Priority / Use Video So

T
p
sele

User Manual

223

Summary of Contents for GRASS VALLEY KayakDD-1

































































































































































































































































































































































































































































Search results

Summary of Contents for GRASS VALLEY KayakDD-1

Reviews:

Brands by name

Popular brands

THOMSON GRASS VALLEY KayakDD-1, User Manual

Search results

Summary of Contents for GRASS VALLEY KayakDD-1

Reviews:

Brands by name

Popular brands