THOMSON GRASS VALLEY KayakDD-1 Page 244 User Manual Download

Page: 244 / 448

KayakDD - Digital Production Switcher

5.11.9

Digital Eff

5.11.9.1

What is it?

effect library is provided to give users examples of the capabilities of the
M as well as a starting point to create own effects.

2 sections:

the section which uses only DPM channel 1 on P-P and ME1. This section

D-planar transformations and can be easily used by owners of systems

o not have 4 DPM channels per M/E.

the section which uses up to 4 DPM channels per effect and uses the

is section will only show results for

built in 2 parts: 1 to introduce a picture and the 2

to remove the picture.

es users to work live with the DPM recall area of the KayakDD™ and also to

ffects easily into E-MEM™ timelines.

cts were built using V664.2 software.

fects will not replay correctly, if at all, using earlier software versions.

fects were built for 4:3 aspect ratio.
fects can be used in 625/50 and 525/60 standard.

5.11.9.2

Configuration Notes for DPM

settings area of your switcher are very important settings

hich affect the edges of pictures in DPM channels. If you use sources which have

y sourced you should ensure that the production crop settings for 4:3 are

Top = 3.05, Left = -4.16, Right = 4.16, Bottom = -3.05.

res will ensure the correct viewing of the effects in this package.

ects Library

How do I Use it?

This DPM
internal DP

is in

The library

•

C1fx

uses
which d

C4fx

•

SpecFX: Kurl™ and Splits/Mirrors effects. Th
owners of fully loaded KayakDD™ switchers.

ct is

Each effe
This enabl
integrate e

•

All effe

The e

•

The ef

•

The ef

In the

Config / Ebox-DPM

w
been digitall
set to
These figu

igure 176

Config - DPM – Timeline – Modify

244

User Manual

Summary of Contents for GRASS VALLEY KayakDD-1

































































































































































































































































































































































































































































Search results

Summary of Contents for GRASS VALLEY KayakDD-1

Reviews:

Related manuals for GRASS VALLEY KayakDD-1

Brands by name

Popular brands

THOMSON GRASS VALLEY KayakDD-1, User Manual

Search results

Summary of Contents for GRASS VALLEY KayakDD-1

Reviews:

Related manuals for GRASS VALLEY KayakDD-1

Brands by name

Popular brands