Player Menus
31
EN
DVD
The Display menu
1.
Select the
Display
option in the main menu
using the
and
buttons and press
button to
access the submenu.
2.
Select one of the options using the
and
buttons, and press
button to access the various
options.
TV Aspect (DVD)
1.
Select a format using the
and
buttons:
4:3
or
16:9
depending on the type of TV
connected to the player.
2.
Press
OK
to confirm.
Display mode (DVD)
Note:This option is available only when the
TV Aspect
mode is set to
4:3
.
1.
Select a display mode using the
and
buttons:
Letterbox
:
displays a wide picture with horizontal bands on the upper and lower portions of
the screen,
Panscan
:
automatically displays wide pictures on the entire screen and cuts off portions
which do not fit.
2.
Press
OK
to confirm.
Progressive Scan
Progressive Scan provides high quality pictures with less flickering.Turn on Progressive Scan if you
used the Component Video sockets of the player to connect a TV or monitor compatible with a
progressive scan signal.
1.
Select
On
using the
and
buttons and press
OK
to confirm.
2.
A confirmation screen appears.
Cancel
is highlighted by default. Use the
button to highlight
Enter
and press
OK
to confirm.
Note: If your TV does not accept the Progressive Scan function, the picture will appear scrambled if you select
Progressive Scan
on the DVD player.
Caution! Once Progressive Scan has been activated, an image will only be visible on a progressive scan TV or
monitor. If you activate Progressive Scan by mistake, you should follow below procedure to reset the unit:
Remove any disc from the unit and close the disc tray. Check that “No Disc” appears on the TV screen.Then
press the
STOP
button and hold it for five seconds. The video output will be restored to the standard setting
and a picture will once again be visible on a conventional analog TV or monitor.
TV Output
1.
Select the option corresponding to the TV connection type using the
and
buttons:
YPbPr
:
if your TV is connected to the COMPONENT/PROGRESSIVE SCAN VIDEO OUT
socket of the player,
RGB
:
if your TV is connected to the Scart socket of the player.
2.
Press
OK
to confirm.
DISPLAY
TV Aspect
Widescreen
16 : 9
Display Mode
Off
Progressive Scan
Move
Select
TV Output
RGB
DTH6300F_EN 28/05/04 15:41 Page 31
