Connections and Setup
9
EN
Tuning in TV channels
The first time you use the DVD/VCR, you will see the ACMS (Automatic Channel Memory
System) displayed on the screen.This system automatically tunes and stores TV channels. If you
want to return to ACMS after your initial set-up, access it via the menu (
ACMS
).
Automatic channel search
1.
Switch the television set on.
2.
Press the
button to turn the appliance on and then press the
VCR
button on the remote
control.
3.
Select the AV channel on the television set.The
ACMS
menu screen appears. Use the
and
buttons on the remote control to select a country
code:
A
:Austria,
B
: Belgium,
CH
: Switzerland,
D
:
Germany,
DK
: Denmark,
E
: Spain,
F
: France,
I
: Italy,
N
:
Norway,
NL
: Netherlands,
P
: Portugal,
S
: Sweden,
SF
:
Finland,
OTHERS
.
4.
Press
OK
to start the automatic tuning process.
5.
When the automatic channel search is completed a screen showing all the channels that have
been found and the positions they have been placed in is displayed.
Note: If the station transmits VPS/PDC signals, the station name will be added automatically.
6.
The automatic channel set-up assigns the numbers to the channels in a predefined order.
These numbers may therefore not match the actual channel numbers. Should this be the case,
change these numbers by carrying out the instructions below (see "Sorting the channels").
7.
Press to store the settings.
Note: After the automatic channel search has taken place, the time and date will set automatically. If the time is
shown as --:-- on the display window, it means that the signal was too weak to allow the clock to be set
automatically. If you wish to manually set the clock, see "Setting the clock" on page 17.
Sorting the channels
For easy channel identification, we suggest that you have a TV magazine at hand.
1.
Press the
VCR
button. Press to access the main menu. Use the
and
buttons to select
PR SET
then press
OK
.
2.
Press again.
3.
To move a channel, use the
and
buttons to
select the programme number that you wish to move.
Then press
. Press
and
until you reach the
position you wish to store the channel in. Press
OK
.
The channel will move to the new position.
4.
To delete a channel, use the
and
buttons to
select the channel number you wish to delete and
press
.After a short while the selected channel will
be deleted.The remaining channels are resorted
automatically.
5.
Press to leave the menu.To move or delete other channels, repeat the above process.
PSET
R
Pr-12
ACMS
A
N
NL
P
S
SF
OTHERS
B
D DK E
F
I
OK
i
Pr-12
ACMS
CH
02
C03
00
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
C06
00
PR-05
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
01
C02
00
PR-01
OK
i
,
DELETE :
MOVE :
PSET
R
DTH6300F_EN 28/05/04 15:41 Page 9
