48
DVD remote control
. . . . . . . . . . . . . . . . . .
6 - 7
Menus
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8
Front and display
. . . . . . . . . . . . . . . . . . . . . . .
10
Access to a scene
. . . . . . . . . . . . . . . . . .
26 - 27
Repeat play
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
27
3D-Surround / Zoom
. . . . . . . . . . . . . . . . . . .
28
Appendix : troubleshooting
Power
• Correctly connect the AC Power Cord to an AC Outlet.
• If the player is not used, i.e. no key pressed for 30 minutes,
it automatially switches to standby (Auto Power Off). Press the
B
or STANDBY key to switch the player on again.
No power ?
Power is switched off automatically ?
Symptom
Remedy
Before requesting service (troubleshooting)
There is no picture ?
The picture is distorted or shakes
during search, forward or reverse ?
The picture shakes in picture still.
There is no sound or it can hardly be
heard ?
No “Surround” sound ?
Noise interference appears on the
TV, while watching a TV programme
and the DVD player is left on ?
Volume level differences playing
different disc types (DVDs, audio /
video CDs).
No sound while playing a CD with
DTS ?
Video and Audio
• Turn on the TV set.
• Check connections.
• Make the correct input selection on the TV set.
• Search, forward or reverse playback generates a slight distortion,
but this is not a malfunction.
• Select "FIELD" or "FRAME" in still mode selection (page 34).
• Check connections.
• Make the correct audio input selection and volume adjustment on
the TV set or hifi system (amplifier or AV selector).
• There is no sound during a pause (still picture), still picture
advance, or slow playback.
• Check speaker configuration in the set-up menu (pages 37-39)
• Turn off DVD player.
• Adjust the master volume "V" with the info display on-screen.
Press yellow
info key (page 25).
• Master volume may be set lower or equal to 95. Change volume
setting to 96 or greater (page 25).
The keys do not activate the
functions they control (unit and / or
remote control).
Cannot copy DVD discs
to video tape ?
• Wipe the disc clean (page 2).
• Set the STANDBY key to OFF (light on) and back to ON again.
Alternatively, turn off the power, disconnect the power plug and
then re-connect it (The player may not be operating properly due
to lightning, static electricity or some other external factor).
• If keys still do not activate the functions they control even when
the above mentionned correcitve action is taken, contact your
THOMSON retailer.
• This player is equipped with anticopy protection (page 52).
DTH3600-GB-F8-DAE 7/05/99 10:13 Page 48