thomann t.racks Power Conditioner 12, User Manual

Page: 10 / 24

DANGER!
Hazardous voltage
Even in standby mode, mains voltage is present on the outputs of the device and
on the connected loads.
Prior to any servicing work on the connected loads, disconnect the mains plugs of
the respective loads from the device.
Prior to any servicing work on the device, disconnect the mains plug of the device
from the mains socket.
DANGER!
Electric shock caused by short circuit
Always use a properly insulated CEE cable to connect the unit to the 400 V mains
grid. Do not modify the CEE cable or the CEE plug. Failure to comply may result in
electric shock and risk of fire and loss of life. If in doubt, seek advice from a regis‐
tered electrician.
Safety instructions
power conditioner
10