thomann Stairville Mini Stage Par Manual Download Page 97

Page: 97 / 100

Cleaning

Clean the optical lenses, that are accessible from the outside, regularly in order to optimize the

light output. The frequency of cleaning depends on the operating environment: wet, smoky or

particularly dirty surroundings can cause more accumulation of dirt on the optics of the

device.

Clean with a soft cloth using our lamp and lens cleaner (item no. 280122).

Always dry the parts carefully.

The fan grids of the device must be cleaned on a regular basis to remove dust and dirt. Before

cleaning, switch off the device and disconnect AC-powered devices from the mains. Use a lint-

free damp cloth for cleaning. Never use solvents or alcohol for cleaning.

Optical lenses

Fan grids

Cleaning

PAR64 PRO 36x3WPar56 Pro 24x3W Mini Stage Par 7x3W

Stage PAR 18 Tri-Color LED3W

Summary of Contents for Stairville Mini Stage Par





































































































Search results

Summary of Contents for Stairville Mini Stage Par

Reviews:

Related manuals for Stairville Mini Stage Par

Brands by name

Popular brands

thomann Stairville Mini Stage Par, Manual

Search results

Summary of Contents for Stairville Mini Stage Par

Reviews:

Related manuals for Stairville Mini Stage Par

Brands by name

Popular brands