thomann Stairville Mini Stage Par Manual Download Page 18

Page: 18 / 100

NOTICE!
Possible data transmission errors
For error-free operation make use of dedicated DMX cables and do not use ordi-

nary microphone cables.
Never connect the DMX input or output to audio devices such as mixers or ampli-

fiers.

You can install the unit in hanging or standing position. When in use, the device must always

be attached to a solid surface or an approved truss. Benutzen Sie zur Befestigung die dafür vor-

gesehenen Öffnungen des zweiteiligen Bügels.
Always work from a stable platform whenever installing, moving or servicing the unit. In doing

so, the area underneath the unit must be cordoned off.
The safety cable must be attached to the bracket.

Mounting options

Installation

LED PAR

Summary of Contents for Stairville Mini Stage Par





































































































Search results

Summary of Contents for Stairville Mini Stage Par

Reviews:

Related manuals for Stairville Mini Stage Par

Brands by name

Popular brands

thomann Stairville Mini Stage Par, Manual

Search results

Summary of Contents for Stairville Mini Stage Par

Reviews:

Related manuals for Stairville Mini Stage Par

Brands by name

Popular brands