thomann Stairville Mini Stage Par Manual Download Page 11

Page: 11 / 100

DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not

within reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from

the unit. They could swallow the pieces and choke!
Never let children unattended use electrical devices.

DANGER!
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present. Never

remove any covers.
There are no user-serviceable parts inside.
Do not use the device if covers, protectors or optical components are missing or

damaged.

Safety

Safety instructions

PAR64 PRO 36x3WPar56 Pro 24x3W Mini Stage Par 7x3W

Stage PAR 18 Tri-Color LED3W

Summary of Contents for Stairville Mini Stage Par





































































































Search results

Summary of Contents for Stairville Mini Stage Par

Reviews:

Related manuals for Stairville Mini Stage Par

Brands by name

Popular brands

thomann Stairville Mini Stage Par, Manual

Search results

Summary of Contents for Stairville Mini Stage Par

Reviews:

Related manuals for Stairville Mini Stage Par

Brands by name

Popular brands