Press the
[SET]
button repeatedly until
‘ON’
or
‘OFF’
and the symbol are flashing in the dis‐
play. Use the / buttons to toggle between locked status (display =
‘ON’
) and normal
operation (display =
‘OFF’
). In locked status, you can view the system settings, but you can't
change them. In this case the display shows the symbol.
Press the
[SET]
button to confirm the setting and proceed to the next menu item.
The display shows the input level of the left and right channels in a bar display. Set the input
sensitivity control (2) so that signal peaks reach the ‘0 dB’ marking. If the input level is still too
low, slide the level adjustment switch (11) into the ‘0 dB’ position.
Locking against changes
Adjusting the input level
Operating
UHF wireless system
34
Summary of Contents for IEM 100
