1 INPUTS
Level meter LEDs for left and right channels.
The top-most "CLIP" LEDs light up when the unit's input level is too high. In this case, decrease the input level at the signal
source or use the corresponding "INPUT LEVEL" controls (13, 16) on the rear panel.
2 Display
Shows menu options and values set.
3 EDIT
Jog wheel for convenient value setting.
4 MENU
Calls up the menu for setting up delay options (units, steps).
5 DELAY
Enables setting up the delay with the jog wheel.
Connectors and controls
DL 2/918
13
