If you temporarily want to switch off the set delay without having to change the value, press
the
[BYPASS]
button. The text
‘DELAY OFF’
appears in the top line of the display.
To switch on the delay again, press the
[BYPASS]
button again. The text
‘DELAY ON’
appears in
the top line of the display.
The set delay may affect either both channels or only one of them. To change the setting, press
the
[CH-SEL]
button twice. Using the jog wheel, you can select between
‘Left’
,
‘Right’
, and
‘L&R’
. Confirm your selection with the
[DELAY]
button.
The noise gate threshold specifies the level below which the output signal is muted. To change
the setting, press the
[NOISE GATE]
button.
Bypass delay
Select channel
Set noise gate threshold
Operation
delay line controller
18
