5
Operation
When all connections have been established, turn on the device using the main switch (10).
The display shows the last set delay value and the last used unit. You can adjust the delay time
by turning the jog wheel.
The delay time can be set separately for either channel in the range from 0 to 2730 ms (corre‐
sponding to 936.4 metres or 3074 feet).
The delay can be set as delay time (in milliseconds) or as the corresponding distance (in metres
or feet). Based on the speed of sound, a delay time of 1000 ms corresponds to a distance of
343 metres (1126 feet). The delay time can be set in steps of 1 ms or 100 ms.
To select the delay options, press the
[MENU]
button. Using the jog wheel, select the
‘Delay
Tune’
option to select the step width or the
‘Del Count Sel’
option to set the unit. Then press
the
[MENU]
button. The corresponding submenu opens.
Select between either
‘100ms’
and
‘1ms’
or
‘ms’
,
‘metres’
, and
‘feet’
. Confirm your selection
with the
[DELAY]
button.
Power on
Select options
Operation
DL 2/918
17
