Thinklogical VelocityKVM-24, Quick Start Manual

Page: 5 / 13

QUICK START GUIDE
PS/2 or USB
connectors
1 LINE IN
MIC OUT
SER IAL PORT
HID
P
S
2
LOCAL FROM CPU
CAUTION! Replace with same type and rating fuse.
CLINK
PWR FOL
RGB/DVI OUT RGB/DVI IN
L1
L2
100-240V-,0.5A, 50/60 Hz
T 2A ,250VAC
HOST
CTRL DEV
USB 1.1
USB HID
UPDATES
CP
STEREO
EMITTER
INPUT
USE
ONLY
WITH
250
V
FUSE
100-240V-,0.5A, 50/60 Hz
T 2A ,250VAC
CAUTION! Replace with same type and rating fuse.
USB 2.0
USB 1.1
HOST
CTRL
USB HID
FOL
SER IAL PORT
MIC IN
LINE OUT
U
P
D
A
T
E
S
P
S
2
L1
L2
PWR
RGB/DVI OUT DDC RGB/DVI OUT
STEREO
EMITTER
OUTPUT
USE
ONLY
WITH
250
V
FUSE
STEP 5: If desired, connect your optional
local keyboard & mouse by inserting the PS/2
or USB HID connectors into the VelocityKVM
Transmitter’s
local devices receptacles and
connect the optional local
RGB/
DVI display to
the Transmitter’s RGB
/DVI OUT Port. Ensure
all system functions are operating properly.
USB HID or PS2
Keyboard/Mouse
USB HID or PS2
Keyboard/Mouse
QUICK START GUIDE
Velocitykvm-5
Velocity kvm-5
Multi-Mode Fiber Extension System
–
Single Head, Single Link RGB/DVI
Multi-Mode Fiber Extension System
–
Single Head, Single Link RGB/DVI
3
1
4
5
5
Local RGB/DVI
OUT
RGB/DVI OUT DDC
USB 2.0 Option
Audio IN/OUT
Stereo 3-D
USB 2.0
Option
Audio OUT ►
RGB/DVI IN
STEP 1: Connect your Multi-Mode Fiber
Optic Cables between the Transmitter and
Receiver units (up to 1000 meters) as shown.
L1: Data Tx to Rx and Video
L2: Data Rx to Tx
◄Audio IN
PS/2 Keyboard
PS/2 Mouse
USB HID (Kybd/Mouse)
USB 1.1 (Kybd/Mouse)
Stereo Emitter IN
STEP 2: Ensure that
the POWER ON/OFF
switch is in the OFF
position (0) on both
the Tx and Rx units.
Connect the supplied
AC Power Cords to
both units and plug
each into a standard
AC supply. Turn both
switches ON (1).
RGB/DVI OUT
STEP 4: Connect the
RGB/DVI and KVM
cables between the
Source CPU and the
VelocityKVM
Transmitter using
the cables supplied in
KIT-000005-R.
Ensure the CPU is
turned ON.
STEP 3: Connect the destination RGB/DVI and KVM devices
to the VelocityKVM Receiver using standard cables. Ensure
the devices are turned ON.
2
VELOCITY-5_Manual_QSG
Source CPU
5
Extend Distribute Innovate