QUICK START GUIDE
USB HID or PS2 Keyboard/Mouse
USB HID or PS2 Keyboard/Mouse
QUICK START GUIDE
Velocitykvm-38
Velocity
kvm-38
Multi-Mode Fiber Extension System
–
Two Dual-Link DVI Displays
Multi-Mode Fiber Extension System
–
Two Dual-Link DVI Displays
3
4
5
USB 2.0 Option
Audio IN/OUT
Stereo 3-D
USB 2.0 Option
Audio OUT
►
STEP 1:
Connect the five Multi-Mode Fiber-Optic Cables
between the Transmitter and Receiver units (up to 1000
meters) as shown;
L1 to L1, L2 to L2, etc.
◄
Audio IN
PS
/2 Keyboard
PS/2 Mouse
USB HID (Kybd/Mouse)
USB
1.1 (Kybd/Mouse
)
Stereo Emitter IN
*
STEP 2:
Ensure that
the POWER ON/OFF
switch is in the OFF
position (0) on both the
Tx and Rx units.
Connect the supplied
AC Power Cords to
both units and plug
each into a standard
AC supply. Turn both
switches ON (1).
STEP 4:
Connect each of the Dual-Link DVI and KVM cables
between the Source CPU and the
VelocityKVM-38 Trans-
mitter
using the cables supplied in KIT-000005-R. Ensure
the CPU is turned ON.
STEP 3:
Connect the destination Dual-Link DVI and KVM
devices to the
VelocityKVM-38 Receiver
using standard
cables. Ensure the devices are turned ON.
2
VELOCITY-38_Manual_QSG
Source CPU
DVI IN 1 Dual-Link
Fiber-Optic Cables:
L1: Data Tx to Rx and Video 1 Primary
L2: Data Rx to Tx
L3: Video 1 Secondary
L4: Video 2 Primary
L5: Video 2 Secondary
STEP 2:
*
1
DVI OUT 1
Dual-Link
DVI OUT 2
Dual-Link
DVI IN 2 Dual-Link
Local Dual-Link
DVI OUT 1
(optional)
Local Dual-Link
DVI OUT 2
(optional)
DVI OUT 1
Dual-Link
DVI OUT 2
Dual-Link
STEP 5:
If desired, connect your
optional local keyboard &
mouse
by inserting the PS/2 or USB HID connectors into the
VelocityKVM-38
Transmitter’s
local devices receptacles
and connect the
optional local Dual-Link DVI displays
to
the Transmitter’s Dual
-Link DVI OUT Ports 1 & 2.
Ensure all
system functions are operating properly.
11
Extend Distribute Innovate
Summary of Contents for VelocityKVM-24
Page 12: ...12 Extend Distribute Innovate...
