Thinklogical VelocityKVM-24, Quick Start Manual

Page: 10 / 13

QUICK START GUIDE
STEP 5: If desired, connect your optional local keyboard &
mouse by inserting the PS/2 or USB HID connectors into the
VelocityKVM Transmitter’s
local devices receptacles.
Ensure all system functions are operating properly.
USB HID or PS2 Keyboard/Mouse
USB HID or PS2 Keyboard/Mouse
QUICK START GUIDE
Velocitykvm-35
Velocity kvm-35
Multi-Mode Fiber Extension System
–
Three DVI Displays
Multi-Mode Fiber Extension System
–
Three DVI Displays
1 4
5
USB 2.0 Option
Audio IN/OUT Stereo 3-D
USB 2.0 Option
Audio OUT ►
DVI IN 1
STEP 1: Connect the 4 Multi-Mode Fiber-Optic Cables
between the Transmitter and Receiver units (up to 1000
meters) as shown.
Audio
◄IN
PS/2 Keyboard
PS/2 Mouse
USB HID (Kybd/Mouse)
USB 1.1 (Kybd/Mouse)
Stereo Emitter IN
* STEP 2: Ensure that
the POWER ON/OFF
switch is in the OFF
position (0) on both the
Tx and Rx units.
Connect the supplied
AC Power Cords to
both units and plug
each into a standard
AC supply. Turn both
switches ON (1).
DVI OUT 1
STEP 4: Connect the DVI and KVM cables between the
Source CPU and the VelocityKVM Transmitter using the
cables supplied in KIT-000005-R. Ensure the CPU is turned
ON.
STEP 3: Connect the destination DVI and KVM devices to
the VelocityKVM Receiver using standard cables. Ensure
the devices are turned ON.
2
VELOCITY-35_Manual_QSG
Source CPU
DVI IN 2
Fiber-Optic Cables:
L1: Data Tx to Rx and Video 1
L2: Data Rx to Tx
L3: Video 2
L4: Video 3
STEP 2: *
DVI IN 3
DVI OUT 2 DVI OUT 3
3
10
Extend Distribute Innovate