20
TC5-8SDA rev.03
TC5-8SDA
1
Specifying the Curve
Set the selection knob to
SET
POINT / T
o
CURVE
. The
current temperature set point
flashes on the display.
Press the push-button. The
word
OFF
is displayed indicat-
ing that the termperature
curve is deactivated. If this is
not the case, see below to deactivate the curve.
Repeat the following steps for each of the six points:
Press the push-button once again. The day number is displayed,
alternating with the word "
day
".
Using the adjustment knob, set the day number to the desired
value.
Press the push-button once again. The current temperature set
point is displayed, alternating with the word "
set
".
Using the adjustment knob, adjust the set point to the desired
value.
Once the six points of the curve have been specified, activate the
curve as explained below.
NOTE
: Make sure the temperature curve is deactivated before
specifying new points (see below).