Thetford SHB981 Series, User And Installation Instructions Manual

Page: 10 / 22

10
LED Indication of Fault or Error Codes.
If the following Symbol ┌┘ or letter E is displayed followed by a number, this
indicates that the appliance has developed an internal technical fault. Switch off
the appliance at the power supply. If the fault indication does not clear when
mains power is restored then it cannot be rectified by the user. Switch off the
power and consult your installer or qualified Service Agent.
Cooling Fan.
The induction unit has a built-in cooling fan which operates as the hob warms up.
The fan will continue to operate to cool the hob after the control knob has been
switched off. This is normal and after cooking, the mains power should be left
connected to allow the fan to cool the internal components until the fan stops
automatically.
Cooking Noises
When cooking with an induction hob, some noise may be emitted by the pan.
This is normal and depends on the type of construction of the pan which may
affect the noise. High power settings may produce the most noticeable noise.
After use
1. Switch Off the induction element by its control, do not
rely on the pan sensor.
2. Once the appliance has cooled, turn off the power supply.
Persons fitted with pacemakers or other electrical implants
The Induction Hob complies with the applicable standards on
electromagnetic interference and complies with IEC 62233:2005
Edition 1. It should not interfere with other electrical equipment
providing they also comply with this standard.
Persons who have a heart pacemaker, insulin pump, or other
electrical implant should clarify with their doctor or the producer of
the implant, whether those units comply with the regulations.
The induction appliance has an automatic overheat protection which
if activated may limit functions or completely turn off the hob.