background image

GENERAL INFORMATION 

 

 

1.

 

GENERAL INFORMATION 

1.1.

 

Proper use of the appliance 

Before  you  make  use  of  this  appliance  make  sure  you  have  read  and  fully  understood  the 

instructions included in this manual.  
The  installation  and  use  of  the  appliance  must  be  performed  according  to  the  instructions 

indicated in this manual in combination with the current national safety regulations.  
The appliance is designed for use in pumped hot water central heating systems. Any other use 
is considered improper and is prohibited. THERMOSTAHL ROMANIA declines any responsibility 
for damages or injuries caused by improper use; in this case the risk is completely at the user’s 

responsibility.  
To ensure an efficient and flawless function of the appliance, it is strongly recommended that 

you have performed an annual service by a qualified technician.  
 

1.2.

 

Safety warnings 

All installation and maintenance procedures must be carried out by professional and authorized 
personnel, in compliance with the indications in the present manual and national regulations. 

Any failure to correctly install this appliance could cause damage or injuries! 
Do not make modifications to parts of the appliance, unless you have contacted the company 

and an authorized service contractor.  
Only original accessories and spare parts must be used to ensure correct and safe function.  
Make sure you respect the cleaning and maintenance procedures on the corresponding intervals. 

Failure to do so can cause malfunction to the appliance and possible damages.  
The boiler is design to function on the fuels indicated in the corresponding paragraph. Any other 
fuel is prohibited. Do not use explosive or flammable substances! Do not store such substances 

inside the boiler room. 
The working pressure varies according to the model. Make sure you use the appropriate water 

pressure.  

Working in  a pressure  higher than the one  indicated in this  manual  is  strictly 

prohibited and dangerous! 

 

1.3.

 

Data label 

The data label of the appliance is placed on the boiler’s back cover, on the external part. Make 
sure that it is properly placed and readable.  
On the label it is indicated the serial number and the manufacturing year of the appliance. 
 

1.4.

 

Document information 

This document is an integral and indispensable part of the product and must be retained in good 

condition by the user. Keep it in a safe place for future reference. 
If the appliance is sold or transferred to another person, this manual has to always follow the 

appliance and handed to the new user or installer.   
 

Summary of Contents for COMPACT 25





















Reviews: