Thermon HELLFIRE 905 Soft-Starter Operation And Parameters Download Page 12

Page: 12 / 12

WARRANTY

Under normal use the Company

warrants to the purchaser that defects in material
or workmanship will be repaired or replaced without
charge (from date of shipment) for a period of:

Any claim for warranty must be reported to the sales
offi ce where the product was purchased for authorized
repair or replacement within the contract terms.
Subject to State or Provincial law to the contrary, the
Company will not be responsible for any expense for
installation, removal from service, transportation, or
damages of any type whatsoever, including damages
arising from lack of use, business interruptions, or
incidental or consequential damages.
The Company cannot anticipate or control the
conditions of product usage and therefore accepts no
responsibility for the safe application and suitability
of its products when used alone or in combination
with other products. Tests for the safe application and
suitability of the products are the sole responsibility of
the user.
This warranty will be void if, in the judgment of the
Company, the damage, failure or defect is the result of:

�

Vibration, radiation, erosion, corrosion, process
contamination, abnormal process conditions,
temperature and pressures, unusual surges or
pulsation, fouling, ordinary wear and tear, lack of
maintenance, incorrectly applied utilities such as
voltage, air, gas, water, and others or any combination
of the aforementioned causes not specifi cally allowed
for in the design conditions

�

Or, any act or omission by the Purchaser, its agents,
servants or independent contractors which for
greater certainty, but not so as to limit the generality
of the foregoing, includes physical, chemical or
mechanical abuse, accident, improper installation
of the product, improper storage and handling of the
product, improper application or the misalignment
of parts.

No warranty applies to paint fi

nishes except for

manufacturing defects apparent within 30 days from the
date of installation.

The Company neither assumes nor authorizes any person to
assume for it any other obligation or liability in connection
with the product(s).

The Purchaser agrees that all warranty work required after
the initial commissioning of the product will be provided
only if the Company has been paid by the Purchaser in full
accordance with the terms and conditions of the contract.

The Purchaser agrees that the Company makes no
warranty or guarantee, express, implied or statutory,
(including any warranty of merchantability or warranty
of fi tness for a particular purpose) written or oral, of the
Article or incidental labour, except as is expressed or
contained in the agreement herein.

LIABILITY:

Technical data contained in the catalog

or on the website is subject to change without notice.
The Company reserves the right to make dimensional
and other design changes as required. The Purchaser
acknowledges the Company shall not be obligated
to modify those articles manufactured before the
formulation of the changes in design or improvements
of the products by the Company.
The Company shall not be liable to compensate or
indemnify the Purchaser, end user or any other party
against any actions, claims, liabilities, injury, loss,
loss of use, loss of business, damages, indirect or
consequential damages, demands, penalties, fi nes,
expenses (including legal expenses), costs, obligations
and causes of action of any kind arising wholly or partly
from negligence or omission of the user or the misuse,
incorrect application, unsafe application, incorrect
storage and handling, incorrect installation, lack of
maintenance, improper maintenance or improper
operation of products furnished by the Company.