ThermoFLUX PELLING 25 ECO, Use And Maintenance Manual

Page: 22 / 58

PELLING ECO
22
5.3.1 Boiler operations
This mode is the default setting and is suitable for almost all installations.
The boiler will independently select the output power levels to keep the boiler
water temperature close to the target temperature. The output of the boiler
is adapted to current needs.
5.3.2 Level operation
This mode is (check with technicians) only in certain situations useful plant.
The boiler is always in the power level up to boiler temperature. If this is
exceeded, the boiler goes back to the lowest power level.
5.3.3 Boiler temperature set
With the TEMPERAT. can set the desired boiler water temperature.
In the boiler operation, the power is controlled according to this temperature.
If the temperature is significantly exceeded, shut down the boiler.
If the temperature is well below, switch on the boiler again.
- MENU - button until the SETTINGS menu
-
▼
- button until the menu item TEMPERAT
- MENU Button to enter into the point
- Use the
▼
and
▲
- buttons, the boiler temperature can be adjusted
- MENU -Button to exit the setting
5.3.4 Setting fixed level
The HEAT LVL. needs to be set in the operating mode levels.
The boiler operating the currently Necessary power level is chosen
automatically.
- MENU - button until the SETTINGS menu
-
▼
- button until the menu item HEAT LVL.
- MENU - Button to enter into the point
- Use the
▼
and
▲
- buttons to the desired power level can be adjusted
- MENU - Button to exit the setting