ThermoFLUX Minitherm, User And Maintenance Manual

Page: 34 / 42

34
ThermoFLUX
Minitherm -
9 Alarms
If faults occur in the heating system, it is possible to fix some of them by
following these instructions.
Display Description Solution
Alarm active-
indicated next to the sign
for alarm
Cancel the alarm can be executed
by pressing the button 4 .
After that, the display lists FINAL
CLEANING lasting 4 minutes. After
that we can restart the stove if we
solve the problem.
NO IGNITION
Failed ignition.
No pellets in the silo - fill the
pellets in a silo
Dosage spiral empty - initial filling
A foreign object stuck dosage
spiral - clean
Poor quality pellets (wet pellet,
long pellets, dust into pellets) -
change the type of pellets
Pellet igniter is defective - replace
it
Contact Service
Restart the stove.
NO PELET
During operation of the
stove, flue gas temperature
has decreased below the
permitted values
No pellets in the silo - fill the
pellets in a silo
Dosage spiral empty - initial filling
A foreign object stuck dosage
spiral - clean
Poor quality pellets (wet pellet,
long pellets, dust into pellets) -
change the type of pellets
Call service
SMOKE PROBE
Flue gas temperature
sensor is defective or not
connected.
Stove lists alarm is active
and goes off.
Call service
AIR PROBE
Air temperature sensor is
faulty or not connected
Stove lists alarm is active
and goes off.
Call service
HOT FUMI
Flue gas temperature is
above the allowed (250 °
C). Stove lists alarm is
active and goes off.
The stove has not been cleaned,
smoke sensor is dirty.
Clean stove and restart the
ignition.