ThermoFLUX Minitherm, User And Maintenance Manual

Page: 14 / 42

14
ThermoFLUX
Minitherm -
Display
8
Info
9
Clock
10
Air temperature indicator
Regulation on the stoves ''Minitherm'' is most important electronic
component. It is consisted of key controling modul set under the cover of the
stove and controling unit with display set on the front side of the stove. With
controling unit it is possible to control functions of the stove and also to check
information about present state of the stove.
Due to the possibilty to work in 5 (five) different powers, regulation can
satisfy needs to increase or decrease heating by automatic adjustment of
power.
If there is a need to increase power, this is registered by regulation and
regulation gives a signal to increase power by adding more pellet as well as
proportional increase of air flow in the burning basket.
When desired temperature is reached (need for heating energy is satisfied)
regulation is decreasing power ( modulates ), or when room thermostat gives
signal that set temperature is reached, stove then goes into SHUT DOWN mode
(if mode STAND-BY is ON )
7
When mark is visible
Clock  programmed ignit. active
Heater  heater active
Pelet dosage  auger active
Smoke fan  fan active
Primary air fan  fan active
Circulating pump  pump active
Alarm  alarm active
7