ThermoFLUX Minitherm, User And Maintenance Manual

Page: 10 / 42

10
ThermoFLUX
Minitherm -
In any case, materials that could potentially catch fire, e.g. wooden planks,
beams, cloth, should be adequately protected with non-combustible material. For
the sake of parity of dimensions, chimneys that are round in shape of the inner
part should have an advantage over the rectangular-shaped chimneys.
Too small inner zone can cause irregular flow from the stove to the top which
could lead to poor stove performance and excessive exhaust gas production that
discharges the exhaust gas to the environment. Gas flue pipe should be
permanently installed and it would be good to make safety door which would
enable the cleaning of inner parts, especially the horizontal parts.
Smoke pipe should be installed fixed. It would be good to leave safety gates that
could do the Minitherm -r cleaning, especially in their horizontal parts.
You should avoid as much as possible horizontal mounting parts. Horizontal parts
must have a slope of at least 3% upwards.
Length of the horizontal part should be minimal and in any case not more than 3
meters.
ALL PARTS OF THE FLUE GASN PIPE NEED TO BE SECURED AND REPLACEABLE
IN ORDER FOR INTERNAL CLEANING.
AVOID MULTIPLE HORIZONTAL DEVIATION AND ANGLES.
3.3 Minimum distances of the stove from wall
and objects
A – minimum distance front - 100 cm
B – minimum distance from side - 20 cm
C – minimum distance back side- 20 cm
D – minimum distance from side - 20 cm
ThermoFLUX leaves itself the right to later perform changes without notice.