Installation Instructions
CAUTION
:
To assemble this heater, you should obtain assistance from another person when handling the larger, heavier pieces.
Please refer to the Page 6 "Dimension and Clearance Detail" before installing this heater.
11
Install Heat Deflector
Remove all the packing materials.
Install the Heat Deflector to the Head using 3 Pan Head
Screws M5x10mm, then tighten all the screws securely.
1
Pan Head Screw
M5x10mm
Qty. 3
Part # S112M05102
2
Install Battery
3
Install Regulator with hose bracket
(For NG Model Only)
Pan Head Screw M6x10mm
(Pre-assembly)
Qty. 2
Part # S112M06102
AA Battery
Note: Reglator with hose can be
assembly at left or rigth side of
back panel.
Summary of Contents for HEATSTRIP TGH34WL
Page 9: ...Parts Diagram 9...