5
Install the Heater to the Wall Mounting Bracket using 1 Pin
Φ
6*150mm with 1 R Cotter Pin, using 1 Bolt M6*150mm with
1 Plan Washer M6 and 1 Wing Nut M6.
Tighten the pin and bolt securely.
Pin
Φ
6 x 150mm
Qty. 1
Part # P05501166D
R Cotter Pin
Qty. 1
Part # P05501164B
Wing Nut M6
Qty. 1
Part # S411M0606A
Bolt M6 x 150mm
Qty. 1
Part # S020100223
Install Heater
12
6
Remove the Finger Protective Rings from Trigger.
Install Red Cord for Trigger "ON"; Black Cord For Trigger "OFF"
Install Cords
4
Install Wall Mounting Bracket
Install the wall mounting bracket to the wall with
appropriate fixings for the material to be attached
(Masonry, wood, metal etc.), using 6 appropriate fasteners
(not included), then tighten all the screws securely.
Summary of Contents for HEATSTRIP TGH34WL
Page 9: ...Parts Diagram 9...
