Thermofilm HEATSTRIP CROSSRAY+ TCS2FL Operator'S Manual Download Page 27

Page: 27 / 27

CONNECTING NATURAL GAS

Contact a registered Gas Fitter/Plumber to obtain a quote for the conversion and to confirm whether this appliance will work effi

ciently with the current gas supply to your household, in accordance with the Installation Code AS/NZS 5601.

The Gas Fitter/Plumber will need to source the necessary parts for the conversion. Note : Conversion Kits can be ordered directly

from Thermofilm Phone: (03) 9562 3455 Email: [email protected]

Upon completion of the conversion, the Gas Fitter/Plumber is Legally required to issue a Compliance Certificate.

Do Not attempt to complete the conversion yourself.

Failure to comply with these requirements and Installation Code AS/NZS 5601 will automatically void the Warranty for this product.

Summary of Contents for HEATSTRIP CROSSRAY+ TCS2FL




























Search results

Summary of Contents for HEATSTRIP CROSSRAY+ TCS2FL

Reviews:

Related manuals for HEATSTRIP CROSSRAY+ TCS2FL

Brands by name

Popular brands

Thermofilm HEATSTRIP CROSSRAY+ TCS2FL, Operator'S Manual

Search results

Summary of Contents for HEATSTRIP CROSSRAY+ TCS2FL

Reviews:

Related manuals for HEATSTRIP CROSSRAY+ TCS2FL

Brands by name

Popular brands