5
CHECKING FOR GAS LEAKS
NEVER CHECK FOR LEAKS WITH
A FLAME.
Make liquid detergent solution by mixing one (1) part
1
.
liquid detergent and four (4) parts water.
Turn burner control knob(s) to "OFF", then turn on gas
2
.
at source.
IF YOU HAVE A GAS LEAK YOU CANNOT
RECTIFY, TURN OFF THE GAS AT THE
SOURCE. CONTACT THE SERVICE
AGENT
O pen
3. Apply the liquid detergent solution to all visible and ac
-
cessible gas connections, including the connection to the
gas cylinder. Bubbles will appear in the liquid detergent
solution if connections are not properly sealed. Tighten or
rectify as necessary.
Note:
This barbecue is approved for use on Natural gas but
must be properly converted from the factory built LP.
Contact your service agent for details.
Conversion and installation must be by a licensed
plumber or gas fitter and comply with local codes
4 parts water
1 part liquid
detergent
CHECKING FOR GAS LEAKS
ALWAYS CHECK FOR GAS LEAKS
EACH TIME YOU USE YOUR BARBECUE.
You should follow this procedure after any of the following:
Not having used the barbecue for an extended period of time,
•
Initial assembly of barbecue,
•
Any disconnection and reconnection of hose assembly,
•
Changing gas cylinder,
•
Upon re-connecting gas cylinder after it has been disconnected for storage.
•
