Page 24
11.3 Fitting the ceramic log set (see page 35 to 38)
Attention! Before placing the Ceramic log set.
With use of gas category G25 20-25 mBar (I2L, I2ELL) mount the primary aeration bracket under the burner
setting for a good fire image.
method:
*
Take the Decoration plate and burner out from
the unit.
*
Remove screws from the burner at the venturi.
*
Mount the aeration bracket with the removed
screws on the burner as shown.
*
Return Burner and decorations back in place.
Please note: when installing the log set and the various glowing materials and accessories, the
following must be taken into account:
*
Keep the opening between the burner and the burner plate free of glowing material
*
There should be no glowing material in or on the pilot burner.
*
Ceramic materials should not come into contact with the cord of the window fixture.
Remove this if necessary. The window may otherwise be damaged.
*
Mix the glowing material (lava granules) and the “fusilli” (spiral-shaped ceramic material) and spread them
evenly over the burner and the burner plate so that they are just covered. Glowing embers can be placed
here and there as decoration.
NOTE
: the remaining material can be discarded. The use of too much glowing material can adversely
affect the combustion process.
*
Place the ceramic wood blocks in the correct order as shown on Pag. 33 t / m 35.
*
Place the logs carefully. Other location can seriously affect the flames or malfunction of the burnproces
(explode)
*
Before replacing the window make sure if ther must be a restriction plate to be placed or not.
See page 23 and "Table of concentric tracks" on page 28
*
If there is a restriction is required for your situation, remove the baffle plate by unscrewing it from the front
of the plate after the plate backwards and then out to be taken. Now install the restrictor plate with two
screws and replace the baffle plate.
*
Now place the two windows in reverse order as described on page 23
.
MAKE SURE THE PILOT LIGHT REMAINS UNOBSTRUCTED!
Incorrectly installed ceramic wood blocks and glowing material may have a significant influence on
the fire image and the burning effect.
Summary of Contents for Trimline 2050 OH
