Thermo Scientific Vanquish Charger, Operating Manual

Page: 63 / 88

7 • Maintenance
Vanquish Charger Operating Manual Page 63
3. Disconnect the USB cable.
4. Open the front door so that you can access the transfer opening to
the autosampler on the right-hand side. Remove the four screws
next to the transfer opening that fix the Charger to the autosampler
shown in
Figure 9 .
Figure 9: Screws attaching the Charger to the autosampler
No. Description
1 Transfer opening
2 Screws fixing the Charger to the autosampler
5. Follow the steps below to protect the mover during shipment using
the original shipping lock screws and foam parts that were removed
during initial installation:
a) Place foam part 1 ( see Figure 10 ) below the mover arm and
lower the mover arm to the lowest position, such that the
shovel and mover arm rest in the cavities of the foam part.