Thermo Scientific Vanquish Charger, Operating Manual

Page: 34 / 88

4 • Unpacking and Transport
Page 34 Vanquish Charger Operating Manual
4.1 Unpacking and Moving
Damaged Packaging, Defective on Arrival
Inspect the shipping container for signs of external damage and, after
unpacking, inspect the Charger for any signs of mechanical damage that
might have occurred during shipment.
If you suspect that the Charger may have been damaged during
shipment, immediately notify the incoming carrier and Thermo Fisher
Scientific about the damage. Shipping insurance will compensate for the
damage only if reported immediately.
Unpacking the Charger
CAUTION—Heavy Load, Bulky Device
The Charger is too heavy or bulky for one person alone to handle safely.
To avoid personal injury or damage to the Charger, observe the following
guidelines:
•
Physical handling of the Charger, including lifting or moving, requires
a team effort of two persons.
• To lift or move the Charger, grasp the Charger by the sides. Do not
move or lift the Charger by the front door. This will damage the door
or the Charger.
To unpack the Charger, follow these steps:
1. Place the shipping container on the floor. Remove the top cover.
2. Remove the accessories.
3. Remove the upper foam spacers from the Charger and remove the
side walls of the shipping card box toward the top.
4. Remove the polyethylene packaging.
5. Slowly and carefully, lift the Charger out of the shipping container.
Never lift the Charger only by the foam spacers or the front door.
6. Place the Charger on a stable surface.