6 Remote operation
50134830_03.2012
23
Thermo Scientific
♦
Use the RS232 module connecting cable (14) to connect the blue
jack socket (9) of the first control unit (12) to the red jack socket (10)
of the second control unit (12) (see Figure 11).
♦
Use another RS232 module connecting cable (14) to connect the
blue jack socket (9) of the second control unit (12) to the red jack
socket (10) of the third control unit (12).
♦
Continue in the same manner until all control units (12) are
connected.
The blue jack socket (9) of the last control unit (12) of the chain will remain
open. The control unit control program (12) will address each unit
automatically. The control unit (12) to which the RS232 interface cable (15)
is connected is automatically considered Unit 1, the next one in line is Unit
2, and so on. The control program also recognizes which control unit (12)
has an open blue jack socket (9) and uses the last unit number to address
this unit.
6.3 Tips for shaker operation
See Chapter 5.1.
