6 Remote operation
Thermo Scientific
22
50134830_03.2012
Connecting further control units (12):
♦
Turn the frequency selection knob (11) to the position OFF (see
Figure 5).
♦
Plug the control line (7) of the magnetic shaker (4) into the control
line connector (8) of the control unit (12).
♦
Plug the mains cable of the first control unit (12) into the first socket
of the socket strip (see Figure 11).
Repeat these steps until the desired number of control units (12) have been
plugged into the socket strip. You may control a maximum of 14 units from
one RS232 interface.
Figure 11: Controlling several control units
Interconnecting several control units (12):
CAUTION
Carefully interconnect the control units (12) using
the module connecting cables (14).
12-1
12-2
12-3
15
7-1
7-2
7-3
14
7-1
Control line of the first control unit
7-2
Control line of the second control
unit
7-3
Control line of the third control unit
12-1 First control unit
12-2 Second control unit
12-3 Third control unit
14
RS232 Module connecting cable
# 50095805
15
RS232 Interface cable
# 50095807
14
