SPECTRONIC 200E USER GUIDE
Administration
Thermo Scientific
SPECTRONIC 200E User Guide
33
1. To initiate remote control of the instrument by a computer, select
Connect To PC
before
starting the software on the attached computer.
Figure 51.
2. Press
as instructed on the screen.
This causes the instrument to send a signal to the computer to let the computer know
that it is there and ready to connect.
Figure 52.
3. When you are ready to disconnect the instrument from the computer, press
.
It will return to the Home menu.
Language
Use
to select the desired instrument language and press
to confirm.
Printer Selection
The SPECTRONIC 200 supports Epson™ TM-T88V Point of Service (POS) thermal
printers and laser printers that use the PCL5e or PCL6 communication protocols.
Before connecting a printer to your SPECTRONIC 200, read the specifications for the
printer carefully to ensure that it supports one of these protocols. Many page printers,
including ink-jet and very low cost laser printers, use proprietary communication protocols
and are not supported by the SPECTRONIC 200.
