Smart2Pure Pro Ultrapure water system
Installation | 23
Figure 25. Sterile overflow tube
Install CO
2
Vent Filter
Remove plug at top of tank and thread CO
2
vent filter in it's
place.
Figure 26. CO
2
Vent Filter installation
Mounting the External
Dispensing Valve to the
Smart2Pure Pro System
(Optional)
Note:
An external dispensing valve with a t-connector is
provided with the assembly kit to dispensed pure water ASTM
Type II quality from the internal or external tank from the
Smart2Pure system.
Follow the steps below to mount the external dispensing
valve:
1. Switch the system OFF. (unplug the main power supply)
2. a
Locate the external dispensing valve, the t-adapter
and the outer diameter ¼” tube.
b. Remove the tube jumper from the connection panel
of the system.
Figure 27. Tube jumper
c. Cut from the outer diameter ¼” tube two tubes with a
length of 80 mm/ 3.2 inch and attach the tubes into
the t-adapter and the connection panel. Attach the
external dispensing valve with a third outer diameter
¼” tube to the t-adapter.
Figure 28. T-Connection and external dispensing
valve
Tank
Tank Overflow
AD 8 mm / 0.31”
Fitting
Tube
CO
2
Vent Filter
Installed
CO
2
Vent Filter
Tuber Jumper
Dispenser
Flow
Dispenser
Back Flow
T-Adapter
Outer Diameter
¼” tube
Connection Panel
External
Outer Diameter
¼” tube
Dispensing Valve
