Ramsey Oretronic IV Tramp Metal Detector REC 4479C
Page 23
Installing System Devices
Optional system devices such as clip or high pile detectors, spray, or flag drop markers, and alarm beacons or
horns may need to be assembled and installed on your conveyor.
Refer to the appropriate drawings in Appendix A for information about installing optional system devices for
your TMD IV model. The Installation Placement drawings and Final Assembly drawings show where optional
devices are to be placed on your conveyor.
Mounting the Control Unit
The TMD IV control comes in a fiberglass enclosure. Figure 2-1 shows the mounting dimensions for the
fiberglass enclosure or a painted mild steel enclosure, Figure 2-18 shows the mounting dimensions of the mild
steel enclosure.
The control unit should be mounted in a vibration-free area less than 10 ft (3 m) from the coils. Mount the
control unit enclosure to a rigid, flat, vertical surface using the 2-position mounting feet on the back of the
enclosure (see Figure 2-1A and Figure 2-1B)
