![Thermo Scientific Odalog G20 User Manual Download Page 8](http://html1.mh-extra.com/html/thermo-scientific/odalog-g20/odalog-g20_user-manual_1104706008.webp)
4 | Safety Precautions
OdaLog Portable Gas Loggers
Odalog G20 RTX Gas Logger-Alert Signals
This instrument transmits radio frequencies
(2 g/3 g/wifi*), ensure all safety precautions are
observed (depending on model). A separation
distance of at least 20 cm must be maintained
between the modem transmitte
r’s
antenna and
the body of the user or nearby persons.
Disable communications when instrument is
being transported via aeroplane.
LITHIUM BATTERY SAFETY:
a. This instrument uses lithium battery. All
safety and handling precautions must be
observed (lithium contained = approx. 3.9
grams per D-size LSH20 high current
battery). If dangerous good transport may
apply in your locality, remove the battery for
transport if dangerous.
(goods suitable for shipping methods are not
available)
b. Avoid moisture contact with lithium batteries,
may cause damage/explosion.
c. Do not attempt to disassemble instrument
that shows signs of battery damage inside
instrument.
d. Only use with manufacturer approved lithium
battery types.
(see 'instrument specifications' for list of
approved batteries)
e. Observe battery manufacturer's guidance on
disposal.
f.
Battery handling/shipping, safety and
disposal information is available from
manufacture or contact distributor for
information.
This instrument is not
‘int
rinsically safe
’
and
should not be used in potentially flammable or
oxygen enriched atmospheres.
Do not use solvents to clean the instrument.
(a damp cloth will suffice).
The apparatus is suitable for ambient
temperature range of -20°C to +50°C.
Install and secure wiring (and excess wiring)
attached to this instrument in accordance with
workplace health and safety regulations of the
installation site.
It is recommended that the instrument be
installed out of direct sunlight. (sheltered)
Service and/or repair work on this instrument
must only be carried out by authorized service
technicians. Return instrument to authorized
service agent/distributor for any internal
maintenance (other than changing SD card and
Sim card).
If using a custom external antenna, ensure
manufactures safety precautions are adhered to.
Long-term exposure to temperature or humidity
levels outside the instrument range may result in
damage to the sensor and inaccurate data.
The Odalog gas logger is not designed to
operate as a safety device, and should not be
used for confined space entry or hazardous area
monitoring.
Do not insert objects (including finger) into gas
inlet as the filter may be damaged.
Do not attempt to disassemble sensors as they
are potentially corrosive.