OdaLog Portable Gas Loggers
Operation | 11
Main Menu
•
•
•
•
•
•
•
•
•
•
•
Figure 6. Main Menu Screens
•
INST:
This screen displays the instantaneous gas reading
in ppm (parts per million) units. If the Transmit mode is
ON, this screen indicates whether the data is logging or
not. It will display transmitting symbol
to indicate that the transmit mode is ON.
•
STATUS:
This screen scrolls through overview of
Instrument data.
•
START LOG:
This screen enables logging the data. This
is confirmed by LOGGING symbol
which flashes on screen.
•
USB:
This screen enables USB (Universal Asynchronous
Receiver-Transmitter) link for communicating with the
Odalog instrument.
•
Bluetooth:
This screen enables Bluetooth Low Energy
(BLE) link for communicating with the Odalog instrument.
•
NULL:
This screen is used to reset the device to
“N
ULL
”
during calibration. Transmit Mode should be turned off
prior to calibration, as any transmissions to the server will
cause any NULL or SPAN screens to be cancelled.
•
SPAN:
This screen tests the sensor with gas.
•
OFF:
This screen enables turning off the instrument. Hold
the Magnet next to the Menu and wait until the display
counts down from
“OF
F2
”
to
“OF
F
”.
Then, release
button.
When the button is correctly released to turn the
instrument off, the OFF title will shift 1 character to the
right to confirm that the instrument is now in the off state.
Start / Stop Log
Figure 7. Start / Stop Log Screens
Start / Stop Log functions are used to enable / disable the
instrument to log the data.
Hold the Magnet next to the Menu and remove the magnet
when the
“ST
ART LO
G”
screen appears.The LOGGING
symbol
on screen will now start flashing.
Hold the Magnet next to the Menu and remove the magnet
when the
“ST
OP LO
G”
screen appears. Use the magnet tool
near
‘Y’
to stop logging the data.
Clear Log
Figure 8. Clear Log Screen
Hold the Magnet next to the Menu until
“CL
EAR LO
G”
is
displayed and then release. Use the magnet tool near
‘Y’
to
turn off the transmission.
STATUS
START
LOG
INST
0.0ppm
HOLD
HOLD
UART
BLE
NULL
HOLD
HOLD
HOLD
SPAN
OFF
OFF 2, OFF 1
OFF
HOLD
Move
the
magnet
HOLD
LOGGING
STATUS
START
LOG
INST
0.0ppm
HOLD
LOGGING
Move
the
magnet
STATUS
STOP
LOG
HOLD
LOGGING
LOGGING
LOGGING
Y N
LOGGING
Swipe
the
magnet
near ‘Y’
Move
the
magnet
DONE
LOGGING
ON 3
ON 2
ON 1
888888
8.8:8.8
888888
8.8:8.8
OFF
HOLD
HOLD
HOLD
HOLD
HOLD
LOGGING
%
°C
°F
ppb
ppm
UART
BLE
CLEAR
LOG
HOLD
HOLD
%
°C
°F
ppb
ppm
HOLD
Move
the
magnet
