Thermo Scientific Lindberg/Blue M Mini-Mite TF55030, Installation And Operating Manual

Page: 46 / 68

Mini-mite Tube Furnace 304243H02 | 6-44
Main Controller: 1x8 & 5x16 Segment Programmable |
Chapter 6
To Configure the Programmer
1. Enter level 2: refer to section “To Enter Level 2” for steps to enter Level 2.
2. To select the Programmer, press as many times as necessary to view
‘PROG’.
3. To configure the first Program, press DOWN or UP to select program
number ‘1’.
Similarly you can configure program (1, 2, 3, 4 or 5) for configuration.
4. To set the ramp unit, press SCROLL button to select ‘RAMP.U’ and then
press DOWN or UP button to select hour, min or sec (In this example
the ramp unit is set in min).
5. To set the Dwell unit, press SCROLL button to select ‘DWEL.U’ and then
Press or to select hour or min (In this example the dwell unit is set in
min).
6. To set the first Target Set point, press SCROLL button to select ‘TSP.1’ . Then
Press DOWN or UP button to set the value.
7. To set the first Ramp rate, press SCROLL button to select ‘RMP.1’ . Press
DOWN or UP button to set the value.