Thermo Scientific
6
S.U.B. TK Resistive Quick Start Guide
Quick Start Guide
• Refer to User’s Guide for detailed instructions on calibration steps
(load cells, sensors, etc).
• A virtual keyboard icon is located at the bottom of the window
display for notes, values, etc.
• Start by turning on the MAIN DISCONNECT switch located at
the back of the control tower.
• Ensure the Emergency Stop (located at the front of the tower) is
not activated (should be in the out position). If it is engaged, then
twist to disengage. Note that the E-stop light will remain red, even
though it is disengaged, until the next step has been completed.
• Turn power on by pressing the green Start/Re-set button located at
the front of the tower behind the operator screen. E-stop light will
then turn off.
• Note that a green operation light, located at the back of the tower,
will also turn on.
The monitor can be tilted up and down and rotate left to right.
1.5 HMI (Monitor)
1.6 Power Up the
System
1.7 System Will
Begin Booting Up
