34
GENESYS 30 User Guide
Thermo Scientific
To reinstall the sample holder, align the locater pin with the pin hole and gently set into place.
Additional sample holders can be purchased to support other kinds of samples such as
test-tubes or long-path cells. These sample holders are attached in the same way as the
standard cell holder.
The individual cell holders are held to the sample compartment tray by a single slotted screw.
The GENESYS 30 uses the same cell holder accessories as other instruments in the
GENESYS line. Standard GENESYS accessories can be positioned in the GENESYS 30
sample tray by removing the supplied 10 mm cell holder and replacing it with another
accessory.
Sample holder removed
Bottom of sample holder
Magnets
Magnets
Locater pin
Locater pin hole
