background image

Thermo Fisher Scientific ULT Freezers

 Unpacking  |   3

Unpacking

At delivery, examine the exterior for physical damage while 
the carrier’s representative is present. If exterior damage is 
present, carefully unpack and inspect the unit and all 
accessories for damage.

If there is no exterior damage, unpack and inspect the 
equipment within five days of delivery. If you find any damage, 
keep the packing materials and immediately report the 
damage to the carrier. Do not return goods to the 
manufacturer without written authorization. When submitting 
a claim for shipping damage, request that the carrier inspect 
the shipping container and equipment.

The packaging can be stored and re-used.

Packing List

Inside the freezer cabinet is a bag containing:

A handle lock key

A USB drive with user manual, including translated 
versions

Certificates of conformance and calibration

A remote alarm contact connector

Posts for rear spacing

If you have ordered a chart recorder, the bag will also contain:

Recorder installation instructions

Extra paper

If you have ordered a backup system, the cabinet will also 
contain:

A hose assembly

English and metric connectors

If specified on the order, the bag may also include:

A QC temperature graph and test log

Calibration information

Summary of Contents for Forma FDE Series































Reviews: