background image

5-2

EC300XL

Thermo Scientific

Section 5

Warranty Information

THERMO FISHER SCIENTIFIC INTERNA

TIONAL

 DEALER W

ARRANTY

The W

arranty Period st

art

s two months from the date your equipment is shipped from our facility

This allows for shipping

time so the warranty will go into ef

fect at approximately the same time your equipment is delivered. 

The warranty protec-

tion extends to any subsequent owner during the first year warranty period. Dealers who stock our equipment are allowed

an additional six months for delivery and inst

allation, provided the warranty card is completed and returned to the 

T

echnical

Services Dep

artment.

During the first year

, component p

art

s proven to be non-conforming in materials or workmanship will be rep

aired or replaced

at 

Thermo's expense, labor excluded. Inst

allation and calibration are not covered by this warranty agreement. 

The 

T

echnical

Services Dep

artment must be cont

acted for warranty determination and direction prior to performance of any rep

airs.

Expendable items, glass, filters, reagent

s, tubing, and gasket

s are excluded from this warranty

Replacement or rep

air of component

s p

art

s or equipment under this warranty shall not extend the warranty to either the

equipment or to the component p

art beyond the original warranty period. 

The 

T

echnical Services Dep

artment must give prior

approval for return of any component

s or equipment. 

At 

Thermo's option, all non-conforming p

art

s must be returned to

Thermo post

age p

aid and replacement p

art

s are shipped FOB destination.

THIS W

ARRANTY

 IS EXCLUSIVE 

AND IN LIEU OF 

ALL

 OTHER W

ARRANTIES, WHETHER WRITTEN, ORAL

 OR

IMPLIED. NO W

ARRANTIES OF MERCHANT

ABILITY

 OR FITNESS FOR 

A

 P

ARTICULAR PURPOSE SHALL

 APPL

Y.

Thermo shall not be liable for any indirect or consequential damages including, without limit

ation, damages relating to lost

profit

s or loss of product

s.

Y

our local 

Thermo Sales Of

fice is ready to help with comprehensive site prep

aration information before your equipment

arrives. Printed instruction manuals carefully det

ail equipment inst

allation, operation and preventive maintenance.

Cont

act your localdistributor for warranty information. W

e’re ready to answer your questions on equipment warranty

, oper-

ation, maintenance, service and special application.

Rev

. 4   2/09

ISO 9001

REGISTERED

Summary of Contents for EC300XL





















Reviews: