1-2
EC300XL
Thermo Scientific
Section 1
Introduction
Specifications
When unpacking your EC300 power supply, be sure you have received
the EC300 unit plus the AC line cord.
Inspect your equipment and packaging material for signs of damage.
Damage to the shipping container may indicate rough handling which
could cause internal damage to the power supply. If you suspect shipping
damage to the power supply, contact your carrier for instructions on filing
a claim. If you are missing any of the above items, contact your supplier
for instructions.
AC Input Power
100-120VAC, 50-60Hz, 100VA Max
Environmental
Operating temperature: 0-40°C, 0-95% R.H. non-condensing
Altitude: 2000m
Overvoltage category II, IEC664
Pollution degree 2, IEC664
DC Output Power
10-300VDC, 75W Max
4-400mA, 75W Max
Ripple: ±1%
Drift: ±1%, after 30-minute warm-up
Compliance
CSA 1010
This equipment has been designed and tested to conform to CSA1010
safety standards, as applicable to laboratory instrumentation. This
applies only to the EC300 when used as specified in the documenta-
tion, in its intended applications, with Thermo Scientific approved elec-
trophoresis apparatus only. Usage in any other manner may not provide
suitable protection.
Unpacking the Power
Supply
