EC300XL 2-1
Thermo Scientific
Section 2
Set-Up and Operation
Select a location that allows for 3" clearance behind the power supply, and
comfortable reach of the front panel controls and cell connections. Do not
block the vented area of the case - on the front bottom of the unit, or the
fan area at the rear. Connect the electrophoresis apparatus to the power
supply, making sure to match the red positive lead to the red positive jack,
and the black negative lead to the black negative jack. Power the unit on
by connecting the AC power cord to the power entry on the rear panel
then plugging the 3 prong AC plug into a power source. Connect the
power supply to a 3-prong grounded AC outlet, using the AC cord
provided with the unit only.
Red positive
jacks
Up/Down arrows
Constant key (K)
Black negative
jacks
Select key (Set)
Run key
Blue On/Off key
3 digit LED display
Figure 2-1.
Control Panel
