Thermo Scientific Dionex, Operator'S Manual

Page: 217 / 228

H • Lockout Instructions for the AE, SP, or SS
Doc. 065250-06 03/2020
205
H.1.2 Installing a Lockout Device
1. Open the lockout device and insert the power connector into the
device (see Figure H-4 ).
2. Close the lockout device and slide the cover so that the padlock holes
are lined up between the cover and the base (see Figure H-5 , View A).
3. Insert a padlock (see Figure H-5 , View B). (You can use more than
one padlock.)
Figure H-4. Insert Power Connector into Lockout Device
Figure H-5. Close Lockout Device and Attach Padlock
A
B