6 | Certifications and Compliance
Compatible Sensors for Smart-Vue Pro Duo / Quatro Data Logger
Emerald Wireless Remote
Sensor
FCC part 15 modular qualification:
FCC ID: 2AA9B04
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received,
including interference that may cause undesired
operation.
FCC RF Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment. End users must
follow the specific operating instructions for satisfying RF
exposure compliance. This transmitter must not be
co-located or operating in conjunction with any other antenna
or transmitter.
Industry Canada RSS-210 modular qualification.
This device complies with Industry Canada license-exempt
RSS standard(s). Operation is subject to the following two
conditions:
1. This device may not cause interference.
2. This device must accept any interference including
interference that may cause undesired operation of the
device.
Under Industry Canada regulations, this radio transmitter may
only operate using an antenna of a type and maximum
(or lesser) gain approved for the transmitter by Industry
Canada. To reduce potential radio interference to other users,
the antenna type and its gain should be so chosen that the
equivalent isotropically radiated power (e.i.r.p.) is not more
than that necessary for successful communication.
OCEASOFT Emerald (bluetooth component BMD-300) is
compliant with the essential requirements and other relevant
requirements of the following standards and / or normative
documents.
Directives:
•
2014/53/EU Radio Equipment Directive (RED)
•
2014/30/EU EMC Directive
•
2014/35/EU Low Voltage Directive
In application of the following standards:
•
EN 300 220-2 V3.1.1
•
EN 300220 -1 V3.1.1
•
EN 300328 V2.2.2
•
IEC 61010-1: 2010 AMD1:2016
•
IEC 62368-1: 2014 (2nd Edition)
•
EN 61326-1: 2013
•
IEC 60950-1:2005 (2nd E A1:2009 + A2:2013
•
EN 301 489-17 V3.2.1
•
EN 301 489-3: V2.2.1
•
EN 301 489-1 V2.2.1
•
EN 61000-6-2: 2005
•
EN 61000-6-4: 2007 / A1: 2011
•
IEC 62311: 2017 Recommandation 1999/519/CE
Directive 2013/35/UE
MIC (Japan)
This equipment contains specified radio equipment that has
been certified to the Technical Regulation Conformity
Certification under the Radio Law.
•
BMD-300 Type Acceptance Number: 210-106799
FCC Statements
FCC CAUTION:
Any changes or modifications
to this equipment not expressly approved by
OCEASOFT may cause, harmful interference and
void the FCC authorization to operate this
equipment.
IC Statements
CE - Conformity with European Regulations
