Thermo Scientific Barnstead Smart2Pure 12 UF, Operating Instructions Manual

Page: 68 / 110

12
System control
58
Smart2Pure Thermo Scientific
Menu
The menu consists of three sub-points:
1. Switching to dual mode together with selection of the measurement unit for the
conductivity measurement.
2. Setting the product water conductivity limit value.
3. Setting the temperature limiting value.
Mono/dual measurement mode
Mono measurement mode:
• In this mode only the conductivity is displayed. The temperature can be read when
the “Enter“ button is pressed.
Dual measurement mode:
• In this mode, temperature and conductivity are shown alternating in a 2-second tact.
The LED for the unit switches with the display.
This following combinations are possible in the Mono/dual measurement mode:
• adjusted resistance value M
:
·cm: “c“ and “ct“
• adjusted resistance value μS/cm: “c“ and “ct“
Step Action Picture
1 Press the „“Menu“ button once then the
display shows you the last adjustment
measurement mode (green LED lights up).
The first line shows the selected unit of
measurement resistance value (factory
adjustments in M
:
·cm).
2 Use the “up/Quit“ and “down“ button to
choose the resistance value for measuring
mode (μS/cm or M
:
·cm) and than choose
the mono measurement mode “c“ or dual
measurement mode “ct“.
18.2
First line
Display
μ S/cm
M
:
·cm
°C
Display shows
or
or c
ct
Display shows